|Electric Resistivity||Less than 0.12 ohm m|
|Water Solubility||30% / 40%|
|Bag Size||10Kg / 20Kg / 25Kg|
· Earth Enhancement material (Backfill material) :
The EEM is highly conductive certified as non-polluting and safe for use near potable ground water system without contamination of water table. The EEM is carbon based and of low resistance, noncorrosive, highly conductive powdered material that improves grounding effectiveness, especially in areas of high soil resistivity such as rocky and sandy areas. This material is suitable to be installed in either slurry or dry form. The EEM is confirms to the following specification.
a) Highly electrically conductive of 20 ohm-cm and non-soluble.
b) Resistivity ensures consistent ohmic Value throughout the life span of earthing.
c) Do not leach into ground to prevent water contamination.
d) EEM is non- toxic and ingredient percentile within the limits mentioned as mentioned in standards of reference.
e) Tested by NABL certified Laboratory.
|Grade Standard||Technical Grade|
|Water Solubility||30% or 40%|
|pH Value||7 - 10|
|Bag Size||10 kg,20 kg,25 kg|
|Electric Resistivity||Less Than 0.12 ohm m|