Surge Protection Devices

Product Details:

Specification:

• Helio Protection Fuse, Mersen HP10M photovoltaic (PV) fuse series is designed specifically to protect the PV modules against the reverse currents
• These HP10M fuses,designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value,allows for safe circuit interruption under typical allow fault current conditions produced by PV arrays.
• Voltage Range (VDC): 660 - 1500 VDC
• Mounting: DIN-rail
• Body Material: PA6 CT1, V-0
• SCCR: 50 kA, 65 kA, 100 kA
• Standards EN 50539-11, UL 1449 3rd Ed, UTE C 61-740-51

Request
Callback

Product Details:

Specification:

• UC: 340 V
• Temperature range: -40℃~+85℃
• Voltage protection level (U_p): <2.2kV

Request
Callback

Additional Information:

• Port of Dispatch: Jaipur
• Production Capacity: As Required
• Delivery Time: 10-15

Product Details:

Our team of professionals is equipped with the latest technical know how to enable us in manufacturing a range of Power Surge Protector for our clients.

Specification:

• Temperature range: -40℃~+70℃
• Voltage protection level (Up): <1,3/1,5/1,8/2,0kV

Request
Callback

Product Details:

Module Surge Protective Device is applied to low-voltage distribution system.

Features:

• Large flow rate, low residual voltage.
• Built in over current,overheating, disconnection device.
• Remote defect indication, remote communication alarm interface.
• Standard 35 mm electric rail installation.

 

Specification:

• Voltage protection level (U_p): <1.8 kV
• Temperature range: -40℃~+60℃

 

Request
Callback

Product Details:

Specification:

• Helio Protection® Fuse gPV were specially designed for PV, and DC more generally speaking,applications
• They comply with both UL512 and IEC 60269-1 standards and RoHS as well
• The plastic parts of our Modulostar Helio Protection are UL94 V0 to V2 (Yellow Card)
• Two models are available: One with and one without blown fuse indication via an indicator light which is on when the fuse is blown(open circuit)
• The blown fuse indication operates from 350VDC up to 1000VDC
• Ampere (A) 150 A
• Mounting Installation On To DIN Rails To EN 60718

Number of Poles:

• 1-pole
• 2-pole
• 3-pole
• 4-pole
• 1+N

 

Standards:

• IEC 60269-2 and IEC 60947-3 Compliance
• RoHS Compliant
• Plastic material: NF 16101 & 16102 Requirement 2 Compliant
• Vibration tested for marine and railway applications
• 3+N

 

Request
Callback

Product Details:

Request
Callback

Product Details:

Request
Callback

Product Details:

• Maximum discharge current (8/20μs): 40kA per phase
• Nominal discharge current (8/20μs): 20kA per phase
• TNS, TNC, TT and IT networks
• Un(L-N/L-L): 48V, 60V, 120/208V, 230/400V, 277/480V,400/690V higher
• DIN-rail mountable, plug-in format
• Visual and remote end of life indicators
• Reversible chassis to allow cable entry from above or below
• Mechanically coded cartridges to avoid cartridgere placement errors

Request
Callback